The
#465VDCVariableDriveControl
Self-PropelledStripper
It goes
FASTER...
and it goes
SLOWER...
than theoriginal self-propelledwalk-behind stripper
Check these features...
All and all the new#465VDChas all the control you could ask for at
a price that is still amere fractionof competitive self-propelledmachines.
Once again, Taylor Tools has raised the bar for floor removal at affordable prices
.
Twist the handle for
infinitely variable speed
control between
0 to27 ft/min.
To back-up, simply squeeze the
handle lever. The blade action
stops and the 465VDC reverses
direction.
The front weight is 50%heavier to addmore
dig-in power and better traction. Theweight
is secured by a “T” Bolt fastener. This new
fastener system totally eliminatesweight
vibration.
Weight retention for
the hood and base
weight is now done
with an adjustable
lever that is quick,
strong and precise.
An emergency stop switch
instantly cuts power to the
motors and drive control.
Blade clamping has been improved
on the#465VDC, with the addition
of a doubling plate that strengthens
the blade clamp power withonly two
fasteners to tighten.
FloorPreparation
5
When thematerial you are removing is coming up easy, you
can easily speed up themachine and plow right through.
When thematerial is really stuck hard, you can slow down to
let themachine’s back-and-forth actionwork on thematerial
to get it upwithout jumping over the topof it.
If themachine does jump upon topof thematerial, you can
now immediately back up and take another bite by simply
reversing themachine insteadof having to stop, tilt the
machine back, and pull themachine back to take another
bite.
With these improvements the#465VDC can tackle the
hard-to-removeprojects that arebeyond the capabilities of
self-propelled strippers that don’t have quick reverse and
variable speed controls.
See the465VDC inactionat
taylortools.com/videos.html
Auxillaryweight for hard to
remove floor coverings.
Less than1/2
the cost of
competitors’
self-propelled
strippers!
Made inUSA
1YEAR
LimitedWarranty
